QA Technology Company, Inc. logo
Competitor Cross Reference icon View Cart
Competitor Cross Reference icon View Cart

100-25 Series | 0.100 [2.54] Centers | 0.250 [6.35] Full Stroke

Designed for loaded board testing.

 
P/N
Cart

Pin Gauge

100-25 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at 0.0670/0.0690 [1.702/1.753] using a PG100 pin gauge.

 

Socket Installation Tool

100-25 Series Socket Installation Tool

Order the ATR100 or ATR100M (metric) adjustable tool for mounting sockets at varying set heights.

A replaceable drive pin ATR100-PIN or stop tube ATR100-STOP can be ordered when your used tool is damaged or worn. Either type is used for inches or metric. Set height range: 0.000 to 0.345 [0.00 to 8.76].

100-25 Series Socket Installation Tool

Order the ITR100-FL or ITR100 SET .XXX. Specify height: 0.000 to 0.345 [0.00 to 8.76] to install 100-25 series sockets.

100-25 Series Socket Installation Tool

A replaceable tip, ITR100-FL-TIP or ITR100-TIP Specify height: 0.000 to 0.345 [0.00 to 8.76], can be ordered when your used tool is damaged or worn.

 

Socket Extraction Tool

100-25 Series Socket Extraction Tool

Order the ETR100-KIT for removing a damaged socket from its mounting hole. The kit comprises of one ETR100 socket extraction tool and one ITR100-FL (Sockets must be flush before extraction).

The ETR100 socket extraction tool is also available separately. A replaceable tip, ETR100-TIP, can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool

100-25 Series Probe Installation Tool

Use the PT100/75 to install 100-25 series probes.

 

Probe Extraction Tool

100-25 Series Probe Extraction Tool

PERX75/100 tools allow easy removal of probes with headed tip styles.

A replaceable tip, PERX75/100-TIP, can be ordered when your used tool is damaged or worn.

 

Damaged Probe Tube Extraction Tool

100-25 Series Damaged Probe Tube Extraction Tool

TERX75/100 tools are used to remove damaged probe tubes. A replaceable tip, TERX75/100-TIP, can be ordered when your used tool is damaged or worn.

 

Indicator Probe

100-25 Series Indicator Probe Tool

Use IP100-2510 or IP100-2540 to measure probe stroke in a test fixture (Plunger remains at deflected position).

 

Socket Plug

100-25 Series Socket Plug Tool

Use the 100-SPR to plug a conventional 100-mil socket where a test point is no longer needed.

Wire Wrap Tools

Wire Wrap Tool

Our WW26, WW28 and WW30 high quality hand wire wrap tools that are available for 26, 28, or 30 AWG wire sizes. These tools form modified wraps on standard 0.025 [0.635] square or round posts up to 0.750 [19.05] long.

Additionally, WW26P, WW28P and WW30P can wrap pins up to 1.125 [28.58] long.


Our WU unwrap tools are double ended to facilitate easy removal of both clockwise and counterclockwise wraps and are compatible with both the standard and long pin versions.

Probe Maintenance Brush

Probe Maintenance Brush

TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

 

Installation Hammer

Socket and Termination Installation Hammer

QA's THM-1 hammer is used in conjunction with our installation and extraction tools.

 

Tool Organizer

Tool Organizer

TRL-1 is a sturdy, compact canvas tool roll that organizes a variety of maintenance tools make them accessible at your fingertips. (Tools are sold separately.)



All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons].