| |
|
NEWS
The
Cutting Edge of Technology
The 9R Razor is now available in our 50mil, .250" travel series probes.
This 9R Razor is designed to contact solder domes and test pads on 50mil centers.
PDF
New Tip style for Bead Probe Technology.
Our new micro-serrated tip styles offer an added solution in extreme
conditions where contaminants, fluxes or oxides make it difficult to achieve reliable contact.
PDF
New Long-Stroke Teradyne Interface Probes
This new probe can be used as replacements in Teradyne’s
TestStation LH and LX test systems. PDF
Our new integraMate ICS 40 Series high reliable hyperboloid contacts
are
designed to mate with Ø.40mm
pins & used on .050" centers.
PDF
|
|
| |
|
|
|
 |
| |
| |
|
| |
039-16 Series ~ .039 (1.00) Centers, .160 (4.06) Stroke
| |
 |
| |
|
Installation |
 |
|
Order the IT39-FLUSH or IT39 SET .XXX
to install 039-16 series sockets. Specify range = .000/.320
[0.00/8.13].
|
| |
|
|
| |
|
Extraction |
 |
|
Order the ET39-KIT for removing a damaged socket
from its mounting hole. The kit consists of one ET39
socket extraction tool, one IT39-FLUSH (sockets
must be flush before extraction).
|
| |
|
|
| |
|
Pin Gauge |
 |
|
Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at
.0307/.0317 [.78/.81] diameter using PG39 pin gauge.
|
| |
|
|
| |
|
|
 |
| |
|
Installation |
 |
|
Order the PT50/39 to install 039-16 series probes.
|
| |
|
|
| |
|
Wire Jack Tool |
 |
|
Order the JT2830 to install the WJ2830, WJ28Cxxxx or WJ30Cxxxx wire jacks |
| |
|
|
All specifications subject to change without notice. All dimensions are in inches [mm].
All spring forces in ounces [gms].
|
| |
|
|
|
