NEWS

New Tip style for Bead Probe Technology.
Our new micro-serrated tip styles offer an added solution in extreme conditions where contaminants, fluxes or oxides make it difficult to achieve reliable contact. PDF

New Long-Stroke Teradyne Interface Probes
This new probe can be used as replacements in Teradyne’s TestStation LH and LX test systems. PDF

Our new integraMate ICS 40 Series high reliable hyperboloid contacts are designed to mate with Ø.40mm pins & used on .050" centers. PDF

	050-T25 Series ~ .050 (1.27) Centers, .250 (6.35) Stroke Overview Tip Styles Sockets Wire Plugs Tools PDF CAD       Installation   Order the IT050-25-FLUSH or IT050-25 SET .XXX. Specify range = .000/.270 [0.00/6.86] to install 050-T25 and 050-R25 series sockets.         Order the AT50-KIT or AT50M-KIT (metric) adjustable tool for mounting sockets at varying heights.           Extraction   Order the ET050-25-KIT for removing a damaged socket from its mounting hole. The kit consists of one ET050-25 socket extraction tool, one IT050-25-FLUSH (sockets must be flush before extraction).           Pin Gauge   Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at .0380/.0390 [0.97/0.99] diameter using PG050-25 pin gauge.                 Installation   Order the PT50/39 to install 050-25 series probes.           Indicator Probes   Use IP050-T2510 or IP050-T2540 to measure probe stroke in a test fixture (plunger remains at deflected position). All specifications subject to change without notice. All dimensions are in inches [mm]. All spring forces in ounces [gms].