| |
|
NEWS
The
Cutting Edge of Technology
We've expanded our Razor family
,
adding a 40° 9R tip style. The 9R Razor is a viable solution for contacting difficult to probe test pads and solder domes.
PDF
New Tip style for Bead Probe Technology.
Our new micro-serrated tip styles offer an added solution in extreme
conditions where contaminants, fluxes or oxides make it difficult to achieve reliable contact.
PDF
New Long-Stroke Teradyne Interface Probes
This new probe can be used as replacements in Teradyne’s
TestStation LH and LX test systems. PDF
Our new integraMate ICS 40 Series high reliable hyperboloid contacts
are
designed to mate with Ø.40mm
pins & used on .050" centers.
PDF
|
|
| |
|
|
|
 |
| |
| |
|
| |
075-25 Series ~ .075 (1.91) Centers, .250 (6.35) Stroke
| |
 |
| |
|
Installation |
 |
|
Order the IT75-FLUSH or IT75 SET .XXX. Specify
range = .000/.345 [0.00/8.75] to install 075-25 series
sockets.
|
| |
|
|
 |
|
Order the AT75-KIT or AT75M-KIT (metric)
adjustable tool for mounting sockets at varying heights.
|
| |
|
|
| |
|
Extraction |
 |
|
Order the ET75-KIT for removing a damaged socket
from its mounting hole. The kit consists of one ET75
socket extraction tool, one IT75-FLUSH (sockets
must be flush before extraction).
|
| |
|
|
| |
|
Pin Gauge |
 |
|
Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at
.0530/.0550 [1.35/1.40] diameter using PG75 pin
gauge.
|
| |
|
|
| |
|
|
 |
| |
|
| Installation |
 |
|
PE75
|
|
|
Order the PT100/75 to install 075-25 and
075-40 series probes.
|
| |
| Extraction |
|
Order the PE75 for removing probes from
the 075-25 sockets (not for use with headless
point styles).
|
|
 |
|
| |
|
| |
|
| |
|
| |
|
|
| |
|
Indicator Probes |
|
|
Used
IP075-2510
or IP075-2540 to
measure
probe
stroke
in a test fixture (plunger
remains at deflected position). |
All specifications subject to change without notice. All dimensions are in inches [mm].
All spring forces in ounces [gms].
|
| |
|
|
|
