NEWS

New Tip style for Bead Probe Technology.
Our new micro-serrated tip styles offer an added solution in extreme conditions where contaminants, fluxes or oxides make it difficult to achieve reliable contact. PDF

New Long-Stroke Teradyne Interface Probes
This new probe can be used as replacements in Teradyne’s TestStation LH and LX test systems. PDF

Our new integraMate ICS 40 Series high reliable hyperboloid contacts are designed to mate with Ø.40mm pins & used on .050" centers. PDF

	X39-25 Series ~ .039 (1.00) Centers, .250 (6.35) Stroke Overview Tip Styles Wire Jacks Wired Terminations Wireless Terminations Tools PDF CAD       Termination Extraction Tools   Order the ET-X39 for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are removed. Order the ET-X39-EXT for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plateds are installed.           Termination Insertion Tools   Order the IT-X39-FLUSH or IT-X39 SET .XXX (-.040/.100 [-1.02/2.54]) tools to install X39-25 terminations.           Pin Gauge Tools   Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate and Back Plate (wired and wireless) should be gauged at .0315/.0325 [0.800/0.823] diameter using PG-X39 pin gauge. Use PT50/39 to install X39-25 probes.           Probe Installation Tools   Order the PT50/39 to install X39-25 Series probes.           Wire Jack Installation Tools   Order the JT2830 to install the WJ2830, WJ28Cxxxx or WJ30Cxxxx wire jacks           X Probe Extraction Tool   Order the PEX39 for removing damaged X Probe tubes without damaging the fixture.           Indicator Probes   Use IPX39-2540 to measure probe stroke in a test fixture (plunger remains at deflected position). All specifications subject to change without notice. All dimensions are in inches [mm]. All spring forces in ounces [gms].