NEWS

New Tip style for Bead Probe Technology.
Our new micro-serrated tip styles offer an added solution in extreme conditions where contaminants, fluxes or oxides make it difficult to achieve reliable contact. PDF

New Long-Stroke Teradyne Interface Probes
This new probe can be used as replacements in Teradyne’s TestStation LH and LX test systems. PDF

Our new integraMate ICS 40 Series high reliable hyperboloid contacts are designed to mate with Ø.40mm pins & used on .050" centers. PDF

	X50-25 Series ~ .050 (1.27) Centers, .250 (6.35) Stroke Overview Tip Styles Wire Jacks Wired Terminations Wireless Terminations Tools PDF CAD       Termination Extraction Tools   Order the ET-X50 for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are removed. Order the ET-X50-EXT for removing a damaged trermination from its mounting hole when the Probe and optional Spacer Plates are installed.           Termination Insertion Tools   Order the IT-X50-FLUSH or IT-X50 SET .XXX (000/.140 [0.00/3.56]) tools to install X50-25/40 termination.           Pin Gauge Tools   Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .042/.043 [1.066/1.092] diameter using PG-X50-P pin gauge. Mounting holes in AT7000, G10/FR4 or similar materals for Back Plate (wired and wireless) should be gauged at .038/.039 [0.965/0.990] diameter using PG-X50-T pin gauge.           Probe Installation Tools   Use PT50/39 to install X50-25 or X50-40 probes.           Wire Jack Installation Tools   Order the JT2830 to install the WJ2830, WJ28Cxxxx or WJ30Cxxxx wire jacks           X Probe Extraction Tool   Order the PEX50 for removing damaged X Probe tubes without damaging the fixture.           Indicator Probes   Use IPX50-2540 to measure probe stroke in a test fixture (plunger remains at deflected position). All specifications subject to change without notice. All dimensions are in inches [mm]. All spring forces in ounces [gms].