The Cutting Edge of Technology

QA is pleased to introduce our New 81 Steel Razor
Faced with the challenges of making contact through today’s problem processes more...

Click to download PDF

The Next Generation of Hyperboloid Contacts

QA Technology is pleased to introduce our new integraMate ICO Series of hyperboloid contacts.
Ideal for high density, ultra reliable connectors used in mil/aerospace electronics, more...

Click to download PDF

	X50-40 Series           Termination Extraction Tools   Order the ET-X50 for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are removed. Order the ET-X50-EXT for removing a damaged termination from its mounting hole when the Probe and optional Spacer Plates are installed.           Termination Insertion Tools   Order the IT-X50-FLUSH or IT-X50 SET .XXX (.000/.140 [0.00/3.56]) tools to install X50-25/40 terminations.           Pin Gauge Tools   Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .042/.043 [1.066/1.092] diameter using PG-X50-P pin gauge. Mounting Holes in AT7000, G10/FR4 or similar materials for Back Plate (wired and wireless) should be gauged at .038/.039 [0.965/0.990] diameter using PG-X50-T pin gauge.           Probe Installation Tools   Use PT50/39 to install X50-25 or X50-40 probes           Wire Jack Installation Tools   Order the JT2830 to install the WJ2830, WJ28Cxxxx or WJ30Cxxxx wire jacks           Indicator Probes   Use IPX50-4043 to measure probe stroke in a test fixture (plunger remains at deflected position). All specifications subject to change without notice. All dimensions are in inches [mm]. All spring forces in ounces [gms].