Company Banner

039-16 Series | .039 [1.00] Centers | .160 [4.06] Full Stroke

Designed for loaded board testing.


Pin Gauge

039-16 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at .0307/.0317 [0.780/0.805] using PG39 pin gauge.


Socket Installation Tool

039-16 Series Socket Installation Tool

Order the ITR039-FL or ITR039 SET Specify Height: .000 to .320 [0.00 to 8.13] to install 039-16 series sockets.

050-T25 Series Socket Installation Tool

A replaceable tip, ITR039-FL-TIP or ITR039-TIP Specify Height: .000 to .320 [0.0 to 8.13], can be ordered when your used tool is damaged or worn.


Socket Extraction Tool

039-16 Series Socket Extraction Tool

Order the ETR039-KIT for removing a damaged socket from its mounting hole. The kit consists of one ETR039 socket extraction tool, one ITR039-FL (sockets must be flush before extraction).

The ETR039 socket extraction tool is also available separately. A replaceable tip, ETR039-TIP can be ordered when your used tool is damaged or worn.


Probe Installation Tool

039-16 Series Probe Installation Tool

Use the PT50/39 to install 039-16 series probes.


Damaged Probe Tube Extraction Tool

039-16 Series Damaged Probe Tube Extraction Tool

TERX31/039 tools are used to remove damaged probe tubes. A replaceable tip, TERX31/039-TIP can be ordered when your used tool is damaged or worn.


Socket Plug

039-16 Series Socket Plug Tool

Use the 039-SPR to plug a conventional 39-mil socket where a test point is no longer needed.


Wire Jack Installation Tool

039-16 Series Wire Jack Installation Tool

Order the JTR2830 to install wire jacks.

A replaceable tip, JTR2830-TIP can be ordered when your used tool is damaged or worn.


Wire Crimper

039-16 Series Wire Crimper Tool

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.


Probe Maintenance Brush

Probe Maintenance Brush

TBR-1 is a made from a natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.


Installation Hammer

Socket and Termination Installation Hammer

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.


Tool Organizer

Tool Organizer

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)

All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].