Company Banner

050-16 Series | .050 [1.27] Centers | .160 [4.06] Full Stroke

Designed for loaded board testing.


Pin Gauge

050-16 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials should be gauged at .0368/.0378 [0.935/0.960] using PG050-05/16 pin gauge.


Socket Installation Tool

050-16 Series Socket Installation Tool

Order the AT50-KIT or AT50M-KIT (metric) adjustable tool for mounting sockets at varying set heights.

050-16 Series Socket Installation Tool

Order the ITR050-FL or ITR050-16 SET .XXX. Specify Height: .000 to .360 [0.00 to 9.14] to install 050-16 Series sockets.

050-16 Series Socket Installation Tool

A replaceable tip, ITR050-FL-TIP or ITR050-TIP Specify Height: .000 to .360 [0.00 to 9.14], can be ordered when your used tool is damaged or worn.


Socket Extraction Tool

050-16 Series Socket Extraction Tool

The ETR050-05/16-KIT for removing a damaged socket from its mounting hole. The kit consists of one ETR050-05/16 socket extraction tool, one ITR050-FL (sockets must be flush before extraction).

The ETR050-05/16 socket extraction tool is also available separately. A replaceable tip, ETR050-05/16-TIP can be ordered when your used tool is damaged or worn.


Probe Installation Tool

050-16 Series Probe Installation Tool

Use the PT50/39 to install 050-16 series probes.


Probe Extraction Tool

050-16 Series Probe Extraction Tool

The PERX39/050 tool allow easy removal of probes with headed point styles. A replaceable tip, PERX39/050-TIP can be ordered when your used tool is damaged or worn.


Wire Plug Installation Tool

050-16 Series Wire Plug Installation Tool

WTR28 or WTR30 tools are used to install Wire Plugs into the back of the socket. A replaceable tip, WTR28-TIP or WTR30-TIP can be ordered when your used tool is damaged or worn.


Wire Strippers

050-16 Series Wire Strippers

WS28 or WS30 tools are preset to strip a length of .120 [3.05] for use with wire plugs, jacks or grips.


Probe Maintenance Brush

Probe Maintenance Brush

TBR-1 is a made from a natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.


Installation Hammer

Socket and Termination Installation Hammer

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.


Tool Organizer

Tool Organizer

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)

All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].