QA Technology Company, Inc. logo
Competitor Cross Reference icon View Cart
United States Flag
  • Mexico Flag
  • China Flag
Competitor Cross Reference icon View Cart
United States Flag
  • Mexico Flag
  • China Flag
  1. Home
  2. Products
  3. In-Circuit/Functional (ICT/FCT) Probes
  4. 100-05 Series Probes

100-05 Series | 0.100 [2.54] Centers | 0.050 [1.27] Full Stroke

Designed for bare board testing.

 

100mil probes for bare board testing

Spring Force

spring force chart

Probe Selection


QA Technology offers many combinations of probes. You can build your probe by selecting the tube style, tip style and spring force for your specific application.

If you have questions at any time during the process, contact us at (603) 926-0348.



P/N 100-PL
05
-
Cart
NOTE: Not all combinations are available. Please verify your part number to be sure it is valid.
If you need assistance, please call 603-926-0348.

Tip Chart

    Distance from Top  
Tip Style Head Length of Socket to Tip Overall Probe Length
02 0.028 [0.71] 0.083 [2.11] 0.369 [9.37]
03 0.040 [1.02] 0.095 [2.41] 0.381 [9.68]
13 0.040 [1.02] 0.095 [2.41] 0.381 [9.68]
23 0.040 [1.02] 0.095 [2.41] 0.381 [9.68]
30 0.028 [0.71] 0.083 [2.11] 0.369 [9.37]
33 0.040 [1.02] 0.095 [2.41] 0.381 [9.68]
40 -- 0.083 [2.11] 0.369 [9.37]
53 0.040 [1.02] 0.095 [2.41] 0.381 [9.68]
63 0.052 [1.32] 0.107 [2.72] 0.393 [9.98]

Begin building your part number.

Select your tube material.
        Current Rating1
Letter Material Average Resistance   MW @ 120°C SS @ 204°C
 P3 Nickel silver/ID precious metal clad < 45 milliohms   14.5 Amps 19.9 Amps
 N Nickel silver/no finish < 65 milliohms   12.0 Amps 18.5 Amps
Select your tip style. Standard material is heat-treated BeCu/plated gold over nickel.
Use the drop-down menu at right to filter your choices by target type.
Select your spring force.
Letter Spring Force Preload @ 0.050 [1.27]
Full Stroke		 Material Cycle Life @
0.050 [1.27] Stroke
 L Low 0.7 [20g/0.19N] 2.0 [57g/0.56N] SS 1,000,000
 S Standard 1.3 [37g/0.36N] 4.5 [128g/1.25N] MW 1,000,000
 H High 2.7 [77g/0.75N] 6.5 [184g/1.81N] SS 1,000,000
You may add your Part Number to your Order.
 

1Current Rating is affected by spring material and lubrication choice. MW springs and lubrication both have a 120°C operating temperature limit. Use SS springs with no lubrication (-N) for testing up to 204°C. Before using probes near these limits, please refer to Current Carrying Capacity and Operating Temperature Application Notes.

2Maximum plunger OD should be used to calculate minimum guide plate clearance holes.

3P tube has Ø0.016 [0.41] hold in end for identification only.

All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons].