QA Technology Company, Inc. logo
Competitor Cross Reference icon View Cart
Competitor Cross Reference icon View Cart

125-25 Series | 0.125 [3.18] Centers | 0.250 [6.35] Full Stroke

Designed for loaded board and high current testing.


125mil 250 Stroke probes for loaded board testing

Spring Force

spring force chart

Probe Selection

QA Technology offers many combinations of probes. You can build your probe by selecting the tube style, tip style and spring force for your specific application.

If you have questions at any time during the process, contact us at (603) 926-0348.

P/N 125-PR
NOTE: Not all combinations are available. Please verify your part number to be sure it is valid.
If you need assistance, please call 603-926-0348.

Begin building your part number.

Select your tube material.
Letter Material Average Resistance     Current Rating1
SS @ 204°C
 N Nickel silver/no finish < 25 milliohms     18.8 Amps
 G Nickel silver/OD gold plated < 15 milliohms     23.0 Amps
 H High conductivity proprietary alloy/gold plated < 10 milliohms     41.0 Amps
 S High conductivity proprietary alloy/silver plated < 10 milliohms     48.0 Amps
Select your tip style. Standard material is heat-treated BeCu/plated gold over nickel.
Use the drop-down menu at right to filter your choices by target type.
Select your spring force.
Letter Spring Force Preload @ 0.167 [4.24]
Material Cycle Life @
0.167 [4.24] Stroke
 L Low 1.9 [54g/0.53N] 4.5 [128g/1.25N] SS 1,000,000
 S Standard 2.2 [62g/0.61N] 7.0 [198g/1.95N] SS 1,000,000
 H High 3.7 [105g/1.03N] 12.0 [340g/3.34N] SS 1,000,000
 Y Elevated 4.4 [125g/1.21N] 18.0 [510g/5.00N] SS 100,000
Select your option (if required).
Letter Description
 B Curved tube (pylon replacement)
 N No probe lubrication. Removing probe lubrication greatly reduced cycle life and should only be used in applications requiring operating temperatures below -45°C or above 120°C.

1Current Rating is affected by spring material and lubrication choice. MW springs and lubrication both have a 120°C operating temperature limit. Use SS springs with no lubrication (-N) for testing up to 204°C. Before using probes near these limits, please refer to Current Carrying Capacity and Operating Temperature Application Notes.

2Maximum plunger OD should be used to calculate minimum guide plate clearance holes.

All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons]. US Patent No. 4,885,533