Used for simple Go/No-Go inspection of socket mounting holes in AT7000, G10/FR4 or similar materials. (Click here for a complete list of part numbers and to order)
The adjustable tool for mounting sockets at varying set heights.
A replaceable drive pin or stop tube can be ordered when your used tool is damaged or worn. Either type is used for inches or metric.
The -FL socket insertion tool is used to set a socket FLUSH or 0.000.
A replacement -TIP can be ordered when your used tool is damaged or worn.
The SET X.XXX (must specify set height) socket insertion tool is used to install sockets. (See applicable series for set height ranges)
A replacement -TIP can be ordered when your used tool is damaged or worn.
(Click here for a complete list of part numbers and to order)
Socket extraction tools remove sockets without damaging the mounting hole.
A replacement -TIP can be ordered when your used tool is damaged or worn.To properly extract a socket from your fixture, we recommend that it first be mounted Flush.
For your convenience, we offer an -KIT which includes of one extraction tool and one -FL insertion tool.
(Click here for a complete list of part numbers and to order)
For ease probe installation while preventing probe tip blunting
Allows easy removal of probes with headed tip styles.
A replacement -TIP can be ordered when your used tool is damaged or worn.
Used to remove damaged probe tubes.
A replacement -TIP can be ordered when your used tool is damaged or worn.
Used to measure probe stroke in a test fixture (plunger remains at deflected position).
(Click here for a complete list of part numbers and to order)
Used as a quick and easy solution to plug a conventional socket where a test point is no longer needed.
Used to install Wire Grips for the wire assembly into the back of the socket.
A replacement -TIP can be ordered when your used tool is damaged or worn.
Used to install Wire Jacks into the back of the socket.
A replacement -TIP can be ordered when your used tool is damaged or worn.
Used to install Wire Plugs into the back of the socket.
A replacement -TIP can be ordered when your used tool is damaged or worn.
WS28 or WS30 tools are preset to strip a length of 0.120 [3.05] for use with wire plugs, jacks or grips.
For insulating wire wrap and wire jack sockets and termination pins on 0.050 [1.27] centers and smaller.
Available in blue 24 [610] lengths with a 0.046 [1.17] ID, this tubing is stiffer than other types, making installation easier. Customer to cut tubing in lengths to suit application.
TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.
The hammer is to be used in conjunction with our installation and extraction tools.
A sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)
Efficiently installing and removing probes, sockets or termination pins for regularly scheduled maintenance or in emergency situations is a skill that takes time and experience. Attempting to learn while using existing production fixtures could result in catastrophic errors and costs if the process is carried out incorrectly.
QA’s new Fixture Training Kit will help you tackle this challenge. Used in conjunction with our instructional videos, the fixture enables you to effectively train new and existing technicians, without disrupting the production schedule
| Socket Installation Tools | |||||
| Series | Complete Tool | Replacement TIP | Replacement Drive Pin |
Replacement Stop Tube |
Set Height (min to max) |
| 039-16 039-25 039-40 |
0.001 to 0.320 [0.03 - 8.13] | ||||
| 050-05 050-16 050-25 050-40 |
050-05 or 050-16: 0.001 to 0.360 [0.03 - 9.14] 050-25 or 050-40: 0.001 to 0.270 [0.03 - 6.86] |
||||
| 075-25 075-40 |
0.001 to 0.345 [0.03 - 8.75] | ||||
| 100-05 100-16 100-25 100-40 |
100-05: only ITR100-FL 100-16: 0.001 to 0.190 [0.03 - 4.83] 100-25 or 100-40: 0.001 to 0.345 [0.03 - 8.76] |
||||
| 125-25 | 0.001 to 0.250 [0.03 - 6.35] | ||||
| 156-25 | 0.001 to 0.250 [0.03 - 6.35] | ||||
| 187-25 | 0.001 to 0.250 [0.03 - 6.35] | ||||
| Socket Extraction Tools | |||
| Product Series | Tool | Replacement TIP | KIT |
| 039-16 039-25 |
|||
| 050-05 |
|||
| 050-16 | |||
| 050-25 050-40 |
|||
| 075-25 075-40 |
|||
| 100-05 100-16 100-25 100-40 |
|||
| 125-25 | |||
| 156-25 | |||
| 187-25 | |||
| Pin Gauge Tools | |||
| Product Series | Tool | Recommended Socket Hole Diameter |
Suggested Drill Size |
| 025-16 | 0.0205/0.0215 [0.521/0.546] | #75 or .55mm | |
| 039-16 039-25 039-40 |
0.0307/0.0317 [0.780/0.805] | 1/32" or .80mm | |
| 050-05 050-16 |
0.0368/0.0378 [0.935/0.960] | #63 or .95mm | |
| 050-25 050-40 |
0.0380/0.0390 [0.965/0.991] | #61 or 1mm | |
| 075-25 075-40 |
0.0530/0.0550 [1.346/1.397] | #54 or 1.35mm | |
| 100-05 /
100-16 100-25 / 100-40 |
0.0670/0.0690 [1.702/1.753] | 1.75mm | |
| 125-25 | 0.0940/0.0960 [2.390/2.440] | #41 or 2.4mm | |
| 156-25 | 0.108/.110 [2.74/2.79] | 7/64" or 2.75mm | |
| 187-25 | 0.141/0.143 [3.58/3.63] | 3.60mm | |
| Indicator Probes | |||
| Product Series | |||
| 050-T25 | |||
| 050-T40 | |||
| 050-R25 | |||
| 050-R40 | |||
| 075-25 | |||
| 075-40 | |||
| 100-25 | |||
| 100-40 | |||
All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons].