X31-16 Series | .031 [.800] Centers | .160 [4.06] Full Stroke

Designed for loaded board testing.

 
Cart

Pin Gauge


X31-16 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe should be gauged at .0250/.0260 [0.635/0.660] using PG-X31-P. Back Plate should be gauged at .0217/.0225 [0.551/0.572] using PG-X31-T.

 

Termination Installation Tool


X31-16 Series Termination Installation Tool X31-16 Series Termination Installation Tool

To install X31-16 termination pins, order the ITRX31-FL

Specify Height (positive or negative):

ITRX31 SET .XXX : -.150 to .100 [-3.81 to 2.54]

ITRX31E-SET .XXX : -.435 to -.150 [-11.05 to -3.81]


A replacement -TIP can be ordered when your used tool is damaged or worn.


Termination Extraction Tool


X31-16 Series Termination Extraction Tool

The ETRX31 for removing a damaged termination from its mounting hole when the Probe Plate is removed.

Order the ETRX31E when the Probe Plate is installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX31-KIT which includes an   ETRX31 & ITRX31-FL.


A replacement-TIP  can be ordered when your used tool is damaged or worn.

Probe Installation Tool


X31-16 Series Probe Installation Tool

Use the PT50/39 to install X31-16 series probes.

 

Damaged Probe Tube Extraction Tool


X31-16 Series Damaged Probe Tube Extraction Tool

The TERX31/039 is for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Grip Installation Tool


X31-16 Series Wire Grip Installation Tool

Order the GTR31 to install the WG31 Wire Grip sleeve.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Strippers


X31-16 Series Wire Strippers

Use WS30 (for 30AWG wire) Wire stripping tool to strip a length of .120 [3.05] required for use with wire plugs, jacks or grips.

 

Probe Maintenance Brush


Probe Maintenance Brush

TBR-1 is a made from a natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

 

Installation Hammer


Socket and Termination Installation Hammer

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

 

Tool Organizer


Tool Organizer

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)



All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].