X39-16 Series | .039 [1.00] Centers | .160 [4.06] Full Stroke

Designed for loaded board testing.

 
Cart

Pin Gauge


X39-25 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate and Back Plate (wired and wireless) should be gauged at .0315/.0325 [0.800/0.826] using PG-X39 pin gauge.

 

Termination Installation Tool


X39-25 Series Termination Installation Tool X39-25 Series Termination Installation Tool

To install X39-16 termination pins, order the ITRX39-FL

Specify Height (positive or negative):

ITRX39 SET .XXX : -.150 to .100 [-3.81 to 2.54]

ITRX39E SET .XXX : -.435 to -.150 [-11.05 to -3.81]


A replacement -TIP can be ordered when your used tool is damaged or worn.

Termination Extraction Tool


X39-25 Series Termination Extraction Tool
X39-25 Series Termination Extraction Tool

The ETRX39 for removing a damaged termination from its mounting hole when the Probe Plate is removed.

Order the ETRX39E when the Probe Plate is installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX39-KIT which includes one ETRX39 and one ITRX39-FL.


A replacement -TIP, can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


X39-25 Series Probe Installation Tool

Use the PT50/39 to install X39-16 series probes.

 

Damaged Probe Tube Extraction Tool


X39-25 Series Damaged Probe Tube Extraction Tool

The TERX39/050 is for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Jack Installation Tools


X39-25 Series Wire Jack Installation Tool

Order the JTR2830 tool to install the wire jacks onto the termination pin.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Strippers


X39-25 Series Wire Strippers

Use WS28 (for 28AWG wire) or WS30 (for 30AWG wire) Wire stripping tool to strip a length of .120 [3.05] required for use with wire plugs, jacks or grips.

 
 

Wire Crimper

X39-25 Series Wire Crimper Tool

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.

 

Probe Maintenance Brush


Probe Maintenance Brush

TBR-1 is a made from a natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

 

Installation Hammer


Socket and Termination Installation Hammer

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

 

Tool Organizer


Tool Organizer

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)



All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].