Designed for dual level, loaded board testing.
Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate and Back Plate (wired and wireless) should be gauged at .0315/.0325 [0.800/0.826] diameter using PG-X39 pin gauge.
To install X39-16 termination pins, order the ITRX39-FL
Specify Height (positive or negative):
ITRX39 SET .XXX : -.150 to .100 [-3.81 to 2.54]
ITRX39E SET .XXX : -.435 to -.150 [-11.05 to -3.81]
A replacement -TIP can be ordered when your used tool is damaged or worn.
The ETRX39 for removing a damaged termination from its mounting hole when the Probe & Spacer Plates are removed.
Order the ETRX39E when the Probe & Spacer Plates are installed.
To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX39-KIT which includes one ETRX39 and one ITRX39-FL.
A replacement -TIP, can be ordered when your used tool is damaged or worn.
Use the PT50/39 to install X39-40 series probes.
PERX39/050 tools allow easy removal of probes with headed tip styles.
A replacement -TIP can be ordered when your used tool is damaged or worn.
The TERX39/050 for removing damaged probe tubes without damaging the fixture.
A replacement -TIP can be ordered when your used tool is damaged or worn.
Order the GTR50 tool to install wire grip sleeve onto the termination.
A replacement -TIP can be ordered when your used tool is damaged or worn.
Order the JTR2830 to install the wire jacks onto the termination.
A replacement -TIP can be ordered when your used tool is damaged or worn.
WS28 or WS30 tools are preset to strip a length of .120 [3.05] for use with wire plugs, jacks or grips.
Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.
TBR-1 is a made from an ESD anti-static natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.
THM-1 Hammer is to be used in conjunction with our installation and extraction tools.
TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)
All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons].