Designed for loaded board testing.
Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .0545/.0560 [1.384/1.422] using PG-X75A-P pin gauge
For the Back Plate (wired) should be gauged at .0515/0525 [1.308/1.333] using PG-X75A-T pin gauge.
For the Back Plate (wireless) should be gauged at .0380/.0390[0.965/0.990] using PG-X50-T pin gauge.
To install X75-16 termination pins, order the ITRX75-FL or
Specify Height (positive or negative):
ITRX75 SET .XXX : -.150 to .140 [-3.81 to 3.56]
ITRX75E SET .XXX : -.435 to -.150 [-11.05 to -3.81]
A replacement -TIP can be ordered when your used tool is damaged or worn.
The ETRX75 for removing a damaged termination from its mounting hole when the Probe Plate is removed.
Order the ETRX75-EXT when the Probe Plate is installed.
To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX75-KIT which includes one ETRX75 and one ITRX75-FL.
A replacement -TIP can be ordered when your used tool is damaged or worn.
Use the PT100/75 to install X75-16 series probes.
The TERX75/100 is for removing damaged probe tubes without damaging the fixture.
A replacement -TIP can be ordered when your used tool is damaged or worn.
Use IPX75-16S43P to measure probe stroke in a test fixture with holes, pads or vias, or IPX75-16S44H with leads or posts (plunger remains at deflected position).
TBR-1 is a made from a natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.
THM-1 Hammer is to be used in conjunction with our installation and extraction tools.
TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)
All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].
mx
