X50-16 Series | .050 [1.27] Centers | .160 [4.06] Full Stroke

Designed for loaded board testing.

 
Cart

Pin Gauge


X50-25 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .0415/.0430 [1.054/1.092] using PG-X50-P pin gauge.

For Back Plate (wired and wireless) should be gauged at .0380/.0390 [0.965/0.990] using PG-X50-T pin gauge.

 

Termination Installation Tool


X50-25 Series Termination Installation Tool X50-25 Series Termination Installation Tool

To install X50-16 termination pins, order the ITRX50-FL

Specify Height (positive or negative):

ITRX50 SET .XXX : -.150 to .140 [-3.81 to 3.56]

ITRX50E SET .XXX : -.450 to -.150 [-11.43 to -3.81]


A replacement-TIP can be ordered when your used tool is damaged or worn.

Termination Extraction Tool


X50-25 Series Termination Extraction Tool X50-25 Series Termination Extraction Tool Replaceable Tip

The ETRX50 for removing a damaged termination from its mounting hole when the Probe Plate is removed.

Order the ETRX50E when the Probe Plate is installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX50-KIT which includes one ETRX50 and one ITRX50-FL.


A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


X50-25 Series Probe Installation Tool

Use the PT100/75 to install X50-16 series probes.

 

Damaged Probe Tube Extraction Tool


X50-25 Series Damaged Probe Tube Extraction Tool

The TERX50/075 is for removing damaged probe tubes without damaging the fixture.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Jack Installation Tool


X50-25 Series Wire Jack Installation Tool

Order the JTR2830 to install the wire jacks.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Indicator Probes


Use IPX50-16S43P to measure probe stroke in a test fixture with holes, pads or vias, or IPX50-16S44H with leads or posts (plunger remains at deflected position).

 

Wire Crimper

X39-40 Series Wire Crimper Tool

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.

 

Probe Maintenance Brush


Probe Maintenance Brush

TBR-1 is a made from a natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

 

Installation Hammer


Socket and Termination Installation Hammer

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

 

Tool Organizer


Tool Organizer

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)



All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].