X50-40 Series | .050 [1.27] Centers | .400 [10.16] Full Stroke

Designed for dual level, loaded board testing.

 
Cart

Pin Gauge Tools


X50-40 Series Pin Gauge

Mounting holes in AT7000, G10/FR4 or similar materials for the Probe Plate should be gauged at .0415/.0430 [1.054/1.092] using PG-X50-P pin gauge.

For Back Plate (wired and wireless) should be gauged at .0380/.0390 [0.965/0.990] using PG-X50-T pin gauge.

 

Termination Installation Tool


X50-25 Series Termination Installation Tool X50-25 Series Termination Installation Tool

To install X50-16 termination pins, order the ITRX50-FL

Specify Height (positive or negative):

ITRX50 SET .XXX : -.150 to .140 [-3.81 to 3.56]

ITRX50E SET .XXX : -.435 to -.150 [-11.05 to -3.81]


A replacement-TIP can be ordered when your used tool is damaged or worn.

 

Termination Extraction Tool


X50-25 Series Termination Extraction Tool X50-25 Series Termination Extraction Tool Replaceable Tip

The ETRX50 for removing a damaged termination from its mounting hole when the Probe & Plates are removed.

Order the ETRX50E when the Probe & Spacer Plates are installed.

To properly extract a termination from your fixture, we recommend that it first be mounted Flush. For your convenience, we offer an ETRX50-KIT which includes one ETRX50 and one ITRX50-FL.


A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Probe Installation Tool


X50-40 Series Probe Installation Tool

Use the PT50/39 to install X50-40 series probes.

 

Probe Extraction Tool


X50-40 Series Probe Extraction Tool

PERX50/075 tools allow easy removal of probes with headed tip styles.

A replacemernt -TIP can be ordered when your used tool is damaged or worn.

 

Damaged Probe Tube Extraction Tool


X50-40 Series Damaged Probe Tube Extraction Tool

The TERX50/075 for removing damaged probe tubes without damaging the fixture.

A replacemernt -TIP can be ordered when your used tool is damaged or worn.

 

Wire Grip Installation Tool


X50-40 Series Wire Grip Installation Tool

Use the GTR50 Wire Grip Installation Tools to install wire grip sleeve into socket.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Jack Installation Tool


X50-40 Series Wire Jack Installation Tool

Order the JTR2830 to install the wire jacks.

A replacement -TIP can be ordered when your used tool is damaged or worn.

 

Wire Strippers


X50-40 Series Wire Strippers

WS28 or WS30 Wire stripping tools are preset to strip a length of .120 [3.05] for use with wire plugs, jacks or grips.

 

Indicator Probes


X50-40 Series Indicator Probes

Use IPX50-4043 to measure probe stroke in a test fixture (plunger remains at deflected position).

 

Wire Crimper

X39-40 Series Wire Crimper Tool

Order the CR2830, an air actuated Wire Crimper Tool, to permanently attach customer supplied wire to Wire Jacks.

 

Probe Maintenance Brush


Probe Maintenance Brush

TBR-1 is a made from a natural bristle to easily clean away fluxes and debris from your test probe tips as part of your regularly scheduled maintenance program.

 

Installation Hammer


Socket and Termination Installation Hammer

THM-1 Hammer is to be used in conjunction with our installation and extraction tools.

 

Tool Organizer


Tool Organizer

TRL-1 is a sturdy, compact canvas tool roll to organize a variety of maintenance tools to be accessible at your fintertips. (tools are sold separately)



All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm].